Interroll 9006 DriveControl for EC100/110 Interroll Rollers

Details

Interroll 9006 DriveControl Card | S-1004493

The Interroll 9006 DriveControl (aka HybridControl) is the ideal solution for your electrical needs. The 9006 is a “smart” card that has the ability to learn from the point of startup about the conveyor application (I.e. automatically sets the zone length). The Interroll DriveControl also has the ability to communicate with other 9006 drive cards when connected through zone-to-zone communication.

• One card controls EC100, EC110 and EC120 RollerDrive
• Standalone ZPA control operates in both standard and enhanced singulation
• On-board adjustable speed, acceleration, and deceleration
• Interfacing I/O provided for controlling speed, starting, stopping, sensor monitoring and operational status
• Drop-in replacement for Interroll P/N 8996A, 8916, 8916A, 9000 and 9004 DriveControls
• Constant speed up to nominal load
• Eliminates the need for external controls in most cases
• Saves costs via rapid installation and easy configuration

Technical Specifications

• Rated voltage: 24 VDC
• Nominal voltage: 22-28 VDC
• Permissible voltage undulation: <5%
• Max. continuous current
  • EC100: 1.8 A
  • EC110: 2.4 A
  • EC120: 2.5 A
• Max. start-up current
  • EC100: 4.1 A
  • EC110: 4.1 A
  • EC120: 5.1 A
• Fuse: 5A Slow Blow
• The ambient temperature in operation: 32 to 104º F
• Ambient temperature during transport & storage: -4 to 167º F
• Max. air humidity: 90% non-condensing
• One-to-one rollerdrive to control card ratio

Features of DriveControl

• Zone-to-zone communication: Activities in upstream and downstream zones are monitored by photo eyes to permit control in various situations.
• Learn Mode: During system startup, the 9006 will automatically set the zone length and save it, simply by running an object from the upstream photo-eye to the downstream photo-eye.
• Diagnostics: LEDs provide the motor, sensor, and jam diagnostics as well as power, fuse, and temperature status.
• Reverse or jog entire system: Switch settings and connections on the board allow the user to reverse the zone-to-zone logic, jog the entire system, or reverse or jog parts of the system, or bypass those functions altogether (default) without the use of external cards.
• NPN or PNP: All inputs and outputs can be switched, collectively, for NPN or PNP with one switch. Only “No fault output” is always active high (a failsafe function with 24 VDC in “No fault status”).
• Multiple dependent RollerDrives in one zone: Up to three RollerDrives can be run from one 9006 (and two dependent cards) to achieve multiple RollerDrives in a single zone. This signal can also be used by a PLC as a “motor running” status input.
• Smart braking: Depending on upstream and downstream zone occupancy, the RollerDrive will brake if needed, and coast if no braking is required. This saves on power, heat, and vibration in the RollerDrive and ultimately in the system. When no photo eyes are blocked in the system, all RollerDrives are in coast mode.
• Dynamic braking: RollerDrive acts like a generator and the 9006 feeds back current into the RollerDrive windings.
• Zero motion hold: When the 9006 has no start signal, the RollerDrive will be held in place.
• Advanced braking: The combination of dynamic braking followed by zero motion hold provides superior braking and holding for many applications.

Zero Pressure Accumulation

Zone A has a package at the photo eye. The 9006 of zone A recognizes its presence, checks zone B for availability and requests permission to transfer the package to zone B. Since zone B has also a package, its 9006 denies the permission until this package has been transferred to zone C, or has at least started being transferred. The 9006 of zone A will only start to operate the RollerDrives in its zone after it gets permission from the 9006 of zone B.

Looking for other Interroll products or components? Check out this link or give us a call at 586-771-1881. Ultimation is a leading Interroll distributor with engineers ready to assist you with your application.

Part Number: S-1004493, MPN: UIS-1004493, GTIN: 00818070023597