Itoh Denki A-200-G Terminal Block with Ground Screw | AC Motor Driven Rollers

Details

Itoh Denki A-200-G Terminal Block with Ground Screw for AC MDRs

The Itoh Denki A-200-G terminal block with ground screw is designed to both electrically connect and secure in place Itoh Denki AC powered rollers during operation.

The A-200-G terminal block is used so the roller shaft does not spin causing the power leads to break and fail on the cable end of the powered roller. The A-200-G also has a 3 wire terminal block for either 115V, 1 phase or 230V, 3 phase input power along with a spot for a ground screw. The opening at the bottom of the plastic cover allows the incoming power to be connected to the 3 wire terminal block inside.

Please note: Itoh Denki Terminal Blocks are specifically designed to work with Itoh Denki AC roller models: PM570AS, PM570AU, PM570BP, PM605AS, PM605AU, PM605BP.

Product Specifications

• Each output shaft should be fixed by the applicable fitting. In case output shaft turns freely, it causes wires to break.
• The shaft hole and studs of the back plate are offset, which allows the mounting plates to slide down on the stud to fasten the output shaft securely.
• Supplied with M5 x 15 pan head Phillips mounting bolts and hardware.
• Supplied with grounding screw (not pictured).

Part Number: A-200-G, MPN: UIA-200-G, GTIN: 00818070025980