Grooved Rollers | 1.9″ Dia. 16 Ga. Galv. | 28″ BF
Grooved rollers for gravity conveyors from Ultimation. Grooved rollers are defined as any roller with formed grooves that are controlled by O-ring belts. These grooved rollers can be used with Itoh Denki motor driven rollers to complete a motorized conveyor and be driven off of the motorized rollers power.
Note: 1.9″ diameter grooved rollers are compatible with the RS19 medium duty frames.
- The overall diameter of 1.9″
- 16 Ga. galvanized flo-coat tube
- 28″ between the frame
- (2) wide grooves, 1/4″ deep
- 1st at 2-3/8″ BF-CL
- 2nd at 1-1/4″ CL-CL
- Unground, crimped, greased bearings
- 7/16″ diameter hex mild steel axle, 29-1/4″ long
- Spring retained on one end
- 266 pounds total load capacity per roller
- Weight 4.695 pounds per roller
Our staff is happy to assist you in analyzing and configuring the conveyor roller requirements you need.
Gravity conveyors are one of the most cost-effective and versatile product lines available. These conveyors are excellent for both permanent and temporary conveyor lines often found in warehouses, shipping departments and assembly areas. Gravity curves and spur options can add to the versatility of straight conveyors. Gravity roller conveyors can support heavier loads than skate wheel conveyors. Ultimation gravity conveyors are available in lengths of 5′ and 10′ and widths of 12″, 15″ 18″, 24″, 30″, 36″ and wider. Roller centers are 1-1/2″, 3″, 4-1/2″ or 6″ between rollers. Frames are steel or aluminum. Roller diameters are 1-3/8″, 1.9″, 2.5″ (heavy duty) or 3.5″ (extreme duty).
Part Number: URS19G-28-P2-ROLLER, MPN: UIURS19G-28-P2-ROLLER, GTIN: 00818070023511