Itoh Denki HBM-604 Driver Card

Details

Itoh Denki HBM-604 Driver Card

HBM-604 ZPA Hybrid Control Card

The Itoh Denki HBM-604 Driver Card is the ideal solution for your electrical needs. These units feature adjustable acceleration and deceleration time of 0 to 2.5 seconds with stable speed operation and manual or automatic recovery of the thermal overload device. Up to twenty different fixed speeds can be selected and feature a pulse signal output that indicates motor revolution. If a motor lock or thermal overload error occurs for more than 4 seconds, the unit will forcibly stop the motor and display an error occurrence indication. Three colored LED lights are used to display and identify error types and occurrences. All units feature a lead-free design and are RoHS compliant.

IMPORTANT: Driver cards cannot be reconfigured to PNP or NPN output. Specify the required output when ordering. 10-pin motor connector required

Product Specifications

• Designed to be functional with the FS and FE series motors, as well as the higher torque series FP
• Run hold timer added to the Forcible RUN input
• Now there is no need for an external controller/time with, or awkward positioning of, a second sensor used for in feeding the conveyor
• The integral indexed rotary switch provides easy speed adjustment without the need for “tweaking”
• More LED functionality to communicate operating and error statuses
• Selectable automatic or manual recovery for thermal overload protection
• Includes motor lock protection that shuts the motor down if it is locked for at least 4 seconds
• Lead-free design for RoHS conformity

General Features

• Operates FS, FE and FP series motors
• Runs one or two Power Mollers in one or two-zone configurations
  • 10-pin motor connector only
• LED indications for operation and error statuses
• Automatic or manual recovery for error statuses
• Motor protection against overheating, stall condition and overspeeding
• Lead-free design for RoHS conformity
• The logic for general zero pressure accumulation (ZPA) is built-in
  • Singulated release
  • Slug (train) release with Flexible Zone Recognition (patented)
• Direct connection for two photo-sensors for power and signal
• Easy connection between adjacent HBM-604B’s with communication cables simplifies wiring
• Independent speed control for each motor
• Adjustable timers by the rotary switch
• Automatically detects the end of a conveyor line for accumulation when the communication cable is disconnected
• Stable speed function to ensure that different weight articles travel at the same rate
• Fire-resistant ABS Enclosure

Card Operation

• Cycle: 1s ON; 1s OFF
• Continuous or Intermittent duty
• Do Not Exceed 150% of no-Load Speed

Environment

• Ambient Temperature: 32 to 104℉ (0 to 40℃)
• <90% Relative Humidity
• (No condensation)
• No Corrosive Gases
• Vibration: < 0.5G

Protection Features

• Thermal overload 199℉ on PCB
• Thermal overload 221℉ in motor
• Two(2) 7A fuses for each motor
• Protection from incorrect wiring (reverse polarity)

Interested in more Itoh Denki 24V DC Products? Visit this page.

Part Number: HBM-604, MPN: UIHBM-604, GTIN: 00818070023658