Itoh Denki Motorized Conveyor Rollers | 1.9 Dia. | 26″BF

Details

Itoh Denki Motorized Conveyor Roller | 1.9″ Dia. | 26″ BF

Itoh Denki Motorized conveyor rollers provide a safe and energy efficient alternative to conveyors traditionally powered by large electric motors. They reduce noise levels in facilities and only operate when needed (Run-On-Demand), thus reducing your facility’s energy costs by eliminating empty conveyors that are running continuously.

Physical Detail:

Motorized Conveyor Roller. 1.9” Dia./48.6 mm, 7/16 non-threaded hex shaft each end, 2 grooves, 300mm/11.8” cable length with 9-pin JST connector, ABEC 1 bearings, zinc plated carbon steel tube, Tube length: 645mm (for 26″ BF Conveyors).

(Note: mounting bracket required on cable end shaft extension to secure shaft)

Electrical Detail:

24v Brushless DC type, standard torque, 4.0 amps starting current  / 2.8 amps rated current, Speed: 25-196 fpm approx by setting on Itoh CB series control card and 50-180 fpm approx. by setting on Itoh HB series control card (Note: operating speed is load dependent)

For more information on the Motorized Conveyor Rollers used in a motorized roller conveyor and  motorized roller technology in general, please visit http://itohdenki.com/

Product Specifications

• Motor Series: PM486FE-60-D-024-P2-KF
• Strong motor torque

• Speed Code: 60 meters per minute: 24-196 FPM
• Long motor life
• Class E insulation
• Dynamic brake
• Highly durable gear and structure
• LED signal for self diagnosis of failure
• Continuous or intermittent duty
• Transport product up to 200 pounds
• 7/16″ Plain Hex Shaft (also available with threaded hex/wrench shoulder – JQ)
• Utilizes CB-002N, CB-016S4 or CB-016S7, CBM-105FN/P Driver Card, ZPA hybrid card, HB-510, 2 Zone Hybrid Driver Card HB-604BP/N, or 2 Zone Controller IB-E03B (Specify NPN or PNP output)
• Available Options: Lagging, Low Temp, Brake, Waterproof, VG Endcap (Poly V)
• Roller requires one MBB-071 (Hex flat up) or MBB-081 (Hex point up) mounting bracket
• JQ shaft requires toothed lock washer and nut; JQ shaft not available in waterproof

Standard Features:

• Brushless DC motor provides long life
• 7/16″ Hex (plain) shaft standard
• ABEC 1 Bearings
• DOM, zinc plated, carbon steel tube
• One shaft mounting, cable end
• Dynamic brake
• Transport product up to 200lbs.

Other sizes available:

Between Frame Lengths of 15″, 17″ 18″, 20″, 21″, 22″, 24″, 26″, 27″, 28″, 30″

Part Number: PM486FE-60-645-D-024-P2-KF, MPN: UIPM486FE-60-645-D-024-P2-KF, GTIN: 00818070020633