Details
Heavy Duty Roller Conveyor Set | 2.5″ Dia. Rollers | 48″ BF x 5′ Long
Gravity roller conveyors are one of the most cost effective and versatile product lines available. These heavy duty roller conveyors are excellent for both permanent and temporary conveyor lines often found in warehouses, shipping departments, and assembly areas. Gravity roller conveyors can support heavier loads than skate wheel type conveyors. Ultimation heavy duty roller conveyors are available in stocking lengths of 5′ and 10′ and stocking width of 48″ between frame, 51″ overall width. Larger widths available – please call for a quote.
Conveyor Specifications
- Overall width: 51″
- Between frame: 48″ (I.e., the widest product than can move along the conveyor)
- Overall length: 5′-0″
- Roller specification: 2.50″ diameter, zinc plated steel, 11/16″ hex axle, spring retained on one end
- Roller centers: 6″
- Frames are punched to accept 3″, 4.5″, and 6″ roller centers
- Rollers are set 1/4″ high above the frame
- Frame: 4″ tall x 1.5″ flange x 8 Ga. powder coated steel with bolt-in cross members
- Paint color: Ultimation Blue
- Includes (2) floor supports adjustable 17-3/4″ to 22-1/4″ top of leg ( 22″ to 26-1/2″ top of roller).
- Couplings: Butt type for bolting sections together
- Additional and replacement rollers can be purchased here.
Load Ratings of this Heavy Duty Roller Conveyor
- Maximum load per roller: 373 pounds
- Load capacity per 5′ section (while using 2 floor supports):
- On 6″ Centers: 3,730 pounds (limited by the roller load capacity)
- On 4.5″ Centers: 5,000 pounds (limited by the frame and leg load capacity)
- On 3″ Centers: 5,000 pounds (limited by the frame and leg load capacity)
How to Choose and Configure the Right Gravity Conveyor
- Choose the gravity conveyor between frame width based on the product dimensions. Allow 1″ each side, and consider wider widths or fixed and/or adjustable side guides if the product may move sideways on the conveyor as it moves.
- Decide on the length you need. Lengths of 5′, 10′ and curves can easily be joined together to achieve the layout required.
- Decide on support centers. Support must be provide either at 5′ or 10′ intervals for all loads.
- Review the tables showing maximum “live” (moving) loads per foot that the conveyor frame is suitable for – remember to count the maximum number of products on the conveyor at once.
- Make sure the product will move smoothly along the rollers and not get stuck between rollers. Choose the roller center distance (3″, 4-1/2″ or 6″ between rollers) so that the product is always gliding on at least 3 rollers at the same time (more if the product is uneven on the lower surface)
Our staff are happy to assist in analyzing and configuring the correct gravity conveyor for your needs!
Part Number: URS25G48-6-5-Set, MPN: UIURS25G48-6-5-Set, GTIN: 00818070026697
