Details
Heavy Duty Industrial Conveyor | 2.5″ Dia. Rollers | 51″ Wide x 48″ BF x 5′ Long
A heavy duty industrial gravity conveyor is a cost-efficient system that uses gravity instead of electricity. It’s widely used in assembly lines, warehouses, distribution centers, and fulfillment operations. Build your custom layout and reassemble it as your business’s needs change. Depending on your workflow, you can install them permanently or as a temporary setup. The heavy duty version is engineered for transporting bulky or heavier loads.
Ultimation’s heavy duty industrial conveyors are available in stocking lengths of 5′ and 10′, and stocking widths of 48″ between frame (51″ overall width). For wider widths, contact us for a quote.
Looking for roller conveyors in different widths, lengths, or with different roller diameters? Browse our online store here!
Conveyor Specifications:
- Overall width: 51″
- Between frame: 48″ (I.e., the widest product than can move along the conveyor)
- Overall length: 5′-0″
- Roller specification: 2.50″ diameter, zinc plated steel, 11/16″ hex axle, spring retained on one end
- Roller centers: 4.5″
- Frames are punched to accept 3″, 4.5″, and 6″ roller centers
- Rollers are set 1/4″ high above the frame
- Frame: 4″ tall x 1.5″ flange x 8 Ga. powder coated steel with bolt-in cross members
- Paint color: Ultimation Blue
- Couplings: Butt type for bolting sections together
- Additional and replacement rollers can be purchased here
Load Ratings of this Heavy Duty Industrial Conveyor:
- Maximum load per roller: 373 pounds
- Load capacity per 5′ section:
- On 6″ Centers: 3,730 pounds (limited by the roller load capacity)
- On 4.5″ Centers: 5,000 pounds (limited by the frame capacity)
- On 3″ Centers: 5,000 pounds (limited by the frame capacity)
How to Choose and Configure the Right Heavy Duty Roller Conveyor:
- Choose the conveyor’s between-frame width based on your product’s dimensions. To ensure smooth movement, leave 1″ clearance on each side. If your product might shift sideways while moving, consider a wider conveyor or add fixed or adjustable side guides.
- Determine the length you need. Join 5’ and 10’ conveyor sections to achieve your required length.
- Decide on support centers. Place support legs at 5’ or 10’ intervals for all loads.
- Be sure your product moves smoothly along the roller conveyor without getting stuck. Decide on a roller center that will keep your product supported by at least 3 rollers simultaneously—or more if your product’s bottom surface isn’t flat.
Our staff are happy to assist in analyzing and configuring the correct industrial conveyor for your needs!
Part Number: URS25G-48-4.5-5, MPN: UIURS25G-48-4.5-5, GTIN: 00818070027229
