Details
Heavy Duty Pallet Conveyor | 2.5″ Dia. Rollers | 48″ BF x 10′ Long | Gravity Conveyor
Gravity roller conveyors are popular due to the versatility they offer while still being an extremely cost-effective solution. These heavy duty pallet conveyors are excellent for both permanent and temporary conveyor lines that are often found within assembly areas, shipping departments, warehouses, and more. Heavy duty pallet conveyors can typically support heavier loads than a traditional skate wheel type conveyor. Ultimation’s heavy duty roller conveyors are available in stocking lengths of 5′ and 10′, and stocking widths of 48″ between frame (51″ overall width). For larger widths, please contact us for a quote.
Looking for gravity conveyors in different widths, lengths, or with different roller diameters? Browse our online store here!
Heavy Duty Pallet Conveyor Specifications:
- Overall width: 51″
- Between frame: 48″ (I.e., the widest product than can move along the conveyor)
- Overall length: 10′-0″
- Roller specification: 2.50″ diameter, zinc plated steel, 11/16″ hex axle, spring retained on one end
- Roller centers: 6″
- Frames are punched to accept 3″, 4.5″, and 6″ roller centers
- Rollers are set 1/4″ high above the frame
- Frame: 4″ tall x 1.5″ flange x 8 Ga. powder coated steel with bolt-in cross members
- Paint color: Ultimation Blue
- Couplings: Butt type for bolting sections together
- Additional and replacement rollers can be purchased here
Load Ratings of this Heavy Duty Pallet Conveyor:
- Maximum load per roller: 373 pounds
- Load capacity per 5′ section of this heavy duty pallet conveyor:
- On 6″ Centers: 3,730 pounds (limited by the roller load capacity)
- On 4.5″ Centers: 5,222 pounds (limited by the frame capacity)
- On 3″ Centers: 7,460 pounds (limited by the frame capacity)
How to Choose and Configure the Right Gravity Conveyor:
- Choose the gravity conveyor between frame width based on the product dimensions. Allow 1″ each side, and consider wider widths or fixed and/or adjustable side guides if the product may move sideways on the conveyor as it moves.
- Decide on the length you need. Lengths of 5′, 10′ and curves can easily be joined together to achieve the layout required.
- Decide on support centers. Support must be provide either at 5′ or 10′ intervals for all loads.
- Review the tables showing maximum “live” (moving) loads per foot that the conveyor frame is suitable for – remember to count the maximum number of products on the conveyor at once.
- Make sure the product will move smoothly along the rollers and not get stuck between rollers. Choose the roller center distance (3″, 4-1/2″ or 6″ between rollers) so that the product is always gliding on at least 3 rollers at the same time (more if the product is uneven on the lower surface)
Our staff are happy to assist in analyzing and configuring the correct heavy duty pallet conveyor for your needs!
Part Number: URS25G-48-6-10, MPN: UIURS25G-48-6-10, GTIN: 00818070027120
