Itoh Denki IB-E03BP Drive Card – PNP Output

Details

Itoh Denki IB-E03BP Drive Card – PNP Output

IMPORTANT: The IB-E03BP drive cards cannot be reconfigured to PNP or NPN output. If NPN Output is needed, please contact us at 586-771-1881.

IMPORTANT: The IB-E03B changed to the IB-E03A due to an internal microchip change from the OEM. This internal microchip change does not affect the card’s performance or capabilities.

Once received, the IB-E03B drive card must be registered online to get access to firmware updates, feature enhancements and much more! Please visit: http://itohdenki.com/ib-e-downloads

IB-E03B General Features

• Designed to be functional with the 486FS, 486FE, 486FP, 605FE, 635FS, and 570FE series motors
• 2 Zone Controller
• PNP Output
• Controls up to (2) 24V DC Itoh Denki Powered Rollers both standard and brake models
  • Standard models will need to also purchase a 9-to-10-pin extension cable for the 10-pin connector
• Direct connection for 2 photo-sensors that power and receive the output signal
• Custom programmable ladder logic for fine tuning your specific application
• I/O device equipping 3 discrete inputs and 5 discrete outputs
• Establish I/O connection to software and control platforms through E/IP
• Local and remote control are available
• 2 port Ethernet switch
• LED status/error indicators
• Motor pulse counting through local logic
• EtherNet/IP CONFORMANCE TESTED
• UL and cUL recognized component
• AOP (Add-On Profile)
• Wire side connectors are available from various sources. They are not provided as standard.

Protection and Environment Specifications

• Thermal overload 185 degrees Fahrenheit on PCB
• Two non-replaceable 7A fuses for each motor, to protect supply line
• Diode for protection from incorrect wiring
• Ambient temperature -4 ~ 104 degrees Fahrenheit
• <90% relative humidity (no condensation)
• No corrosive gases
• Vibration < 1.0G

Part Number: IB-E03BP, MPN: UIIB-E03BP, GTIN: 00818070023757