Details
Medium Duty Roller Conveyor – 27″ Wide x 10′ Long – 1.9″ Rollers
Gravity roller conveyors are one of the most cost effective and versatile product lines available. These medium duty roller conveyors are excellent for both permanent and temporary conveyor lines often found in warehouses, shipping departments, and assembly areas. Gravity roller conveyors can support heavier loads than skate wheel type conveyors. Ultimation medium duty roller conveyors are available in stocking lengths of 5′ and 10′ and stocking widths of 18″, 24″, and 27″. Larger widths available – please call for a quote.
Conveyor Specifications
- Overall width: 27″
- Between frame: 24″ (i.e the widest product than can move along the conveyor)
- Overall length: 10′
- Roller specification: galvanized 1.900″ diameter steel rollers, 16 Ga. wall thickness
- Available in 3″, 4.5″, or 6″ roller centers.
- Frame: 3-1/2″ deep x 1-1/2″ flange x 10 Ga. powder coated steel with bolt-in cross members
- Paint color: Ultimation Blue
- Couplings: Butt type for bolting sections together
- Leg supports are sold separately
- Additional and replacement rollers can be purchased here.
Load Ratings of this Conveyor
- Maximum load per roller: 267 pounds
- Maximum load per foot (without additional center supports): 120 pounds
- Maximum load capacity when conveyor frame is fully supported: 5,340 pounds with 6″ centers, 7,209 pounds with 4.5″ centers, 10,680 pounds with 3″ centers
How to Choose and Configure the Right Gravity Conveyor
- Choose the gravity conveyor width based on the product dimensions. Allow 1″ each side, and consider wider widths or fixed and/or adjustable side guides if the product may move sideways on the conveyor as it moves.
- Decide on the length you need. Lengths of 5′, 10′ and curves can easily be joined together to achieve the layout required.
- Check the load rating table which shows the load capacity of each roller
- Decide on support centers. Support must be provide either at 5′ or 10′ intervals for all loads.
- Review the tables showing maximum “live” (moving) loads per foot that the conveyor frame is suitable for – remember to count the maximum number of products on the conveyor at once.
- Make sure the product will move smoothly along the rollers and not get stuck between rollers. Choose the roller center distance (3″, 4-1/2″ or 6″ between rollers) so that the product is always gliding on at least 3 rollers at the same time (more if the product is uneven on the lower surface)
- See the “Downloads” tab on this page for a full catalog and more information
Our staff are happy to assist in analyzing and configuring the correct gravity conveyor for your needs!
Optional Equipment (not included):
- Stationary floor support legs. Click here to see the available range (opens link in a new tab).
- “Rollers set low” (see graphic). Standard configuration of these conveyors is “Rollers set high”
- Guide rails – Adjustable channel guide rails, fixed angle and channel guide rails
- See the “Downloads” tab on this page for catalogs and more information
Note: Some product images show other models and/or optional additional equipment such as leg supports which are sold separately. Check specifications of this model before ordering
Part Number: URS19G-27-6-10V, MPN: UIURS19G-27-6-10V, GTIN: 00818070021326