Details
Itoh Denki CB‑016‑LT Low‑Temperature Driver Card
The Itoh Denki CB-016-LT low temperature driver card operates in environments as low as –22F, making it an ideal solution for automating cold storage and freezer facilities. This low temperature conveyor driver card features simple transport mode (continuous run), has 20 fixed speeds, and uses external control logic. If you require ZPA functionality and built-in logic for low temperature, view the HB-510-LT.
The Itoh Denki CB-016-LT low temperature control card can be used to replace motorized roller driver cards relocated into cold rooms or freezer conveyor environments. It is designed for use with Itoh Denki low temperature motorized rollers and integrates with Itoh Denki 24V DC systems.
Product Specifications
- Cold-rated to -22°F (-30°C)
- Adjustable acceleration and deceleration time (0 to 2.5s)
- 20 different fixed speeds
- Stable speed operation
- Manual or automatic recovery of the thermal overload device
- Select speeds easily using a combination of one (1) DIP switch and one (1) rotary switch
- The card forcibly stops the motor if an error lasts 4 seconds
- Three (3) LEDs to identify the type of error and number of error occurrences
- Pulse signal output to indicate motor revolution
- Lead-free design; RoHS compliant
- Sustained low voltage (less than 15V DC) for at least 1 second
- Fluctuating voltage dropping below 15V DC, 5 times within 0.5 second
- Delayed Start-up Over-current response
- One second (1s) delay after the RUN signal is applied before over-current indication is active
- External Direction control
- When you change the external DIR signal while the motor is running, the motor stops for 0.5 seconds, then runs again in the opposite direction
SKU: CB-016-LT, MPN: CB-016-LT
